Storage Hook

Most wall hooks are a compromise: your layout is dictated by studs you can’t see, drywall anchors cap your real holding power, and once you commit—you're stuck patching holes if anything changes. In garages it’s worse. Light-duty hooks flex, loads creep outward, and gear slides to the end like it’s barely hanging on, common with slatwall solutions.

The Toden Storage Hook fixes the whole system problem. It snap-fits into the integrated under-shelf channel on Toden surfaces—no ledger boards, no anchors, no spacing math. Place hooks exactly where you want them, start loading them up, and pop-out to reconfigure anytime to get it exactly how you want or if needs change. It may not be immediately apparent but you can stagger the storage hooks front to back in either channel location, creating offset storage. The Toden Storage Hook is also designed with 2 anti-slip notches which keep items separated and secure of all shapes and sizes. Purpose built is an understatement, it's built to do real work (rated 300 lbs per hook).

Key benefits

• Stud-free spacing: Put hooks where your stuff needs them—choose from 2 under-shelf channels and limitless placement.
• No tools, no holes: Snap in, step back and have a look, adjust without drilling, anchors, or measuring
• Made for real loads: Built tough, this not a decorative “coat-hook” product
• Anti-slip notches: Helps stop straps, cords, and hangers from creeping and bunching. Perfect for keeping hanging purses and keeping them separated in closets as well.
• Easy to reconfigure: Change layouts in minutes—no patching drywall, no repainting, just on-the-fly adjustability
• Paintable: Blend it into your space if you want a cleaner look.

Best uses

• Helmets, packs, and outerwear (mudroom, gear wall)
• Extension cords, hoses, straps, lawn chairs, levels, and bags (garage)
  
• Hang hand bags without touching, long dresses, scarves, ties, and hats (closet)
• Sports gear and accessories (bike gear, ski gear, training equipment)
• “Overflow” storage under shelves to keep surfaces clear and usable

How it works

1. Install a Toden surface (properly mounted to studs with the recommended fasteners) which can be found in this article
2. Snap-fit the Storage Hook into the under-shelf surface accessory channel.
3. Reconfigure anytime—pop out and move hooks to get it how you want or as your storage needs change without measuring.

Sizing & system Fit

• System fit: Designed to snap into Toden under-shelf surface channels (compatible with Toden modular surfaces/shelving that include the integrated accessory channel).
• Placement: Position anywhere along the channel for custom spacing and clean layouts in forward or rearward channel, here's a demo video
• Use case fit: Ideal for hanging anything beneath a shelf run to free up surface space and keep items visible.
• Direct wall mount: Is it possible to mount this hook directly to a wall or ledger board? Sure, why not, we always encourage people to be creative, just drill a hole in the front of the hook and mount it up.

Specs

• Type: Snap-fit storage hook accessory for Toden surfaces
• Load rating: 300 lbs per hook
• Install: Tool-free snap-in; repositionable any time
• Grip feature: Anti-slip notches to help keep items in place and separated
• Finish: Paintable (clean, scuff, and use common spray/roll-on paints)

FAQ

Does this mount directly to drywall or studs?
Yes - This hook is designed to snap-fit into the Toden surface channel without the need for fasteners. However, if a DIYer wanted, it could be surface mounted if desired but it would require drilling a hole into the face of the hook for mounting. 

Can I move hooks after I install them?
Yes. That’s the point. Snap in, remove, and re-space without drilling new holes. It's truly penalty-free customization.

What can I hang on it?
Anything - Whether it's a strap, loop, handle, hanger, or carabiner—helmets, packs, cords, bags, and more. If you use two hooks then you can store things like skis, fishing rods, levels, pipes, etc. Whatever is sensible across your space for your needs.

Will it stop items from sliding together?
Yes - The anti-slip notches help reduce creeping of objects, especially with items which are oddly weighted, like baby backpack carriers. The notches also keep separation between items—making them easier to grab and go.

Can I paint it to match my wall?
Yes. Light scuff + clean prep, then paint with common spray or roll-on paints, check out this article

Load Rating: 300 lbs. each
Depth: 6"
Width: 1"
Height: 5"

1 - Storage Hook

Made in USA

Toden products are Patent Pending and internationally protected under the Patent Cooperation Treaty (PCT).

This product is made from recycled plastic bottles and automobile headlamps. See below for percentage relative to this product.

Storage Hook: 100% Recycled Content

You have 30-days to return any item(s) using any of the following methods:

• Shopify self-serve return request
• Email: returns@todenind.com
• Call: (800) 679-1256