J.K.Verified
- Delivered in 3–5 business days
- Free shipping over $50
- Lifetime warranty
- Made in the USA and Canada
What's included
6 - 14" Wall Brackets
12 - Twist-lock Pins
3 - Surface End Cap (L+R)
1 - Twist-lock Assembly Tool
Load ratings & dimensions
Length: 72"
Width: 16"
Height: 1"
Bracket load rating: 1,000 lbs.
Length: 14"
Width: 3"
Height: 7"
Where it's made
Toden products are Patent Pending and internationally protected under the Patent Cooperation Treaty (PCT).
Recycled materials
Surface: 30% recycled content
Twist pin: 100% recycled content
Assembly tool: 100% recycled content
Shipping
Free shipping on orders over $50. Delivered in 3–5 business days.
FREE WALL HEIGHT GUIDE (PDF)
Industry standard heights for every space.
By stacking three engineered, floating Toden surfaces into a single wall footprint, this setup completely replaces bulky floor cabinets while giving you maximum storage, staging, and active workspace.
When you run out of shop space, the temptation is to start stacking: a plastic drawer unit here, a cheap wire shelf there, and floor cabinets that swallow half your garage. The result? A chaotic setup where your main workbench becomes a dumping ground for power tools, overhead lighting is completely blocked, and you're stepping over floor clutter just to reach a hammer.
We built the Triple Tier Wall-Mounted Toden Workstation to deliver the ultimate vertical command center. By stacking three engineered, floating Toden surfaces into a single wall footprint, this setup completely replaces bulky floor cabinets while giving you maximum storage, staging, and active workspace.
Three Tiers of Pure Efficiency
- Top Tier | High-Capacity Overhead Storage: Maximize your upper wall space by stowing heavy HDX storage totes, seasonal gear, and bulk shop supplies high off the ground. The underside features a built-in LED channel that casts continuous, shadow-free task lighting down onto your main workspace and tool pegboard.
- Middle Tier | Primary Work Surface: Your central command deck. Positioned at standard workbench height, this ultra-rigid surface handles heavy projects, vices, and daily shop abuse while keeping your most essential hand tools organized on the wall right above it.
- Bottom Tier | Active Tool Staging Deck: Say goodbye to a cluttered work surface. This lower deck acts as an immediate staging zone for circular saws, power drill kits, tool bags, and small parts organizers—keeping your main bench 100% open for the project at hand.
The Floating Advantage: Zero Lost Floor Space
Even with three full levels of heavy-duty storage, the entire system mounts cleanly to your studs without touching the floor. That leaves a massive, open cavity underneath to store heavy floor-bound storage bins, rolling shop vacuums, or trash cans—making shop cleanups effortless.
Engineered for Real Life
- Waterproof & Chemical-Tolerant Skin: Nonporous and abrasion-resistant, this rigid hollow-core profile will never swell, sag, stain, or rust from high humidity, oil drips, or fluid spills.
- 70% Simpler Installation: Ditch the endless forest of brackets and hundreds of screws. Toden gets you maximum structural support with a cleaner mount and significantly less installation time.
- Integrated Modular Tech: Includes hidden wire-routing channels for power cords, a built-in LED lighting groove, and under-surface mounting tracks that let you slide and lock custom accessories without drilling additional holes.
Key Benefits
- 1,200 lb surface rating for serious storage and real work in any application
- 1" thick, finished look that fits homes, garages, and small businesses
- Fewer brackets, less measuring vs typical “every 16 inches” systems
- Nonporous, abrasion-tolerant surface built for daily use, even in humid environments
- Integrated LED groove for clean under-shelf lighting on the fly learn more
- Built-in wire tray to route cords for desk / TV / workstation setups / pick up a too far away outlet
- Under-surface channels designed for modular mounting and long-run flexibility, you've never hung anything under a shelf-until now
- Multi-purpose by design: shelf → desk → bench → work surface → it's your world, we're just living in it
- Clean hardware + load-rated brackets (not flimsy, generic shelf arms) or diagonal bracing to get in the way
Best uses
- Garage wall shelf for bins, tools, and heavy gear
- Workshop workbench / workstation surface
* Check out our article for help on the best heights for your application here
How it works
- Mount the brackets to wall studs (two brackets per kit, up to 48" apart).
- Set the surface onto the brackets using the under-surface channel geometry.
- Lock it in with the included twist pins
- Finish the ends with the included end caps for the polished look
- Optional: add LED strip lighting in the integrated groove and route cords in the wire tray. Learn more about LED lit shelving here
Reviews
4.8 89 reviews
Install Like a Pro
Get a pro-grade result
Questions
Common questions
Still unsure? Call (800) 679-1256 or use the chat.
What are the load ratings?
Surface: 1,200 lb. Wall bracket: 1,000 lb. Closet rod bracket, storage hook and surface end cap: 300 lb each.
How do I work out what I need?
Start with a 72-inch kit, then add 72-inch extension kits until you reach your wall length. Kits include the wall brackets, pins and surfaces for the run, plus extension sleeves where sections join.
How far apart do the brackets go?
Every 48 inches, so there are fewer studs to find. For extra-heavy loads, add more brackets wherever you need them.
How much can I overhang?
Up to 24 inches past a bracket. That means fewer brackets, less cutting, and you can split surface seams between brackets using an extension sleeve.
How do I mount in corners?
Surface end caps can take the place of a bracket going into a corner and still keep the heavy-duty strength.
Is this made of cheap plastic?
Absolutely not. Toden surfaces are a true 1-inch-thick, load-rated surface made from recycled plastic. They are impervious to humidity, highly resistant to chemicals and won't sag or rust.