David TuckerVerified
- Delivered in 3–5 business days
- Free shipping over $300
- Lifetime warranty
- Made in the USA and Canada
What's included
1 - 14" Wall Brackets
4 - Twist-lock Pins
3 - Extension Sleeves
1 - Twist-lock Assembly Tool
*Surface End Cap not included. Kit extends existing Toden shelving and re-uses existing end cap.
Load ratings & dimensions
Width: 72"
Depth: 16"
Height: 1"
Bracket load rating: 1,000 lbs. each
Depth: 14"
Height: 7"
Extension sleeve load rating: 600 lbs. each
Length: 10"
Width: 1.4"
Height: 0.8"
Where it's made
Toden products are Patent Pending and internationally protected under the Patent Cooperation Treaty (PCT).
Recycled materials
Surface: 30% Recycled content
Twist Pin: 100% Recycled content
Assembly Tool: 100% Recycled content
Shipping
Free shipping on orders over $300. Delivered in 3–5 business days.
FREE WALL HEIGHT GUIDE (PDF)
Industry standard heights for every space.
No measuring tape required. Extend any surface for a perfect fit with rock-solid joint splicing. Tool-free installation for a seamless, professional finish.
Large living room walls are notorious for making standard media consoles look ridiculously under-scaled. You mount a great 6-foot floating shelf under your TV, but against a wide 15- or 20-foot accent wall, it instantly looks lost—like a tiny afterthought floating in a sea of empty drywall. Fixing that proportion with traditional cabinetry or custom built-ins usually means hiring contractors, tearing into finished walls, or dropping thousands on massive, floor-bound media centers that swallow your living room floor space and trap dust underneath.
The 6ft Floating Media Center Extension Kit gives you the power to scale your entertainment setup to match the true architectural scale of your living space. Simply remove the end cap from your existing Toden media shelf, slide the high-strength extension sleeves into the rigid hollow core, and lock the new 6-foot surface cleanly into place. Reattach the end cap, and your floating console seamlessly expands to span large living room walls—no contractors, no drywall demolition, and zero tools required for the connection.
Key Benefits
- Proportional Balance for Large Walls: Scale your floating console to anchor expansive living room accent walls, creating a clean, high-end look underneath 75"+ screens without leaving awkward empty wall gaps.
- Invisible, Tool-Free Join: High-strength internal sleeves slide directly into the hollow core profile, delivering a rock-solid connection that looks like a custom, continuous built-in.
- Built-in Cable & Lighting Channels: Conceal messy HDMI cables, soundbar leads, and power cords inside the integrated wire pathways, while utilizing the built-in under-shelf LED groove for ambient living room task or mood lighting.
- Zero Floor Footprint: Keep your living room floor completely open and uncluttered—leaving plenty of room for subwoofers, decorative baskets, or robot vacuums while keeping vacuuming effortless.
- Preserves the Finished Look: End cap off, extend the run, end cap back on—maintaining the clean, deliberate lines of the original Toden installation.
- Heavy-Duty AV Gear Capacity: Engineered with Toden’s nonporous, rigid skin to hold heavy audio receivers, center-channel speakers, gaming consoles, and decor without bowing or sagging over time.
Best Uses
- Expansive Living Room TV Walls: Extend your floating media shelf to balance ultra-wide television setups on long main walls.
- Media + Display Combination Runs: Expand your entertainment shelf to showcase soundbars, gaming systems, books, and home decor side-by-side along the same sleek line.
- Open-Concept Great Rooms: Run clean, long-span horizontal lines across shared living and dining spaces to unify the room’s architecture.
- Minimalist Floating Credenzas: Create a low-profile, high-impact entertainment wall without buying bulky, floor-standing furniture.
How It Works
- Remove the end cap from the installed Toden surface run
- Insert the 3 extension sleeves into the hollow-core ends of the existing surface
- Slide on the new 6-foot surface to extend the row
- Add the 2 wall brackets to support the new section
- Reinstall the end cap to finish the end clean
Sizing & System Fit
- Adds: 1 additional 6-foot section to an existing installed Toden Desk
- Connection: 3 extension sleeves slide into the hollow core of the Toden surface already installed
- System fit: Designed specifically for Toden surfaces (this is an add-on, not a stand-alone shelf) and comes with necessary wall brackets
Specs
What’s included
- 1 × 6-foot Toden surface
- 3 × Extension Sleeves
- 1 × Wall bracket (with pins)
- 1 x Assembly Tool
Load ratings (per component)
- Surface: 1,200 lbs each
- Wall brackets: 600 lbs each
- Extension sleeves: 1,000 lbs each
Quick-hit FAQ
Do I have to take my existing shelves off the wall to extend them?
No—this kit is designed to extend a row that’s already installed by working from the end cap.
Do I need tools?
Not for the sleeve connection, bracket connection, or end cap. You will need to mount the added wall brackets like any shelf bracket install, 4 screws - just like last time.
How much length does one kit add?
One kit adds 6 feet to a single row.
Can I keep extending after that?
Yes—stack additional Extension Kits to keep growing the run to meet your changing needs.
Does extending help with accessories?
Yes. A longer row gives you more usable space for snap-in accessories like Storage Hooks and Closet Rod Brackets to hang anything under the shelf as well.
Reviews
4.8 92 reviews
Install Like a Pro
Get a pro-grade result
Questions
Common questions
Still unsure? Call (800) 679-1256, use the chat, or send us a message.
What are the load ratings?
Surface: 1,200 lb. Wall bracket: 1,000 lb. Closet rod bracket, storage hook and surface end cap: 300 lb each.
How do I work out what I need?
Start with a 72-inch kit, then add 72-inch extension kits until you reach your wall length. Kits include the wall brackets, pins and surfaces for the run, plus extension sleeves where sections join.
How far apart do the brackets go?
Every 48 inches, so there are fewer studs to find. For extra-heavy loads, add more brackets wherever you need them.
How much can I overhang?
Up to 24 inches past a bracket. That means fewer brackets, less cutting, and you can split surface seams between brackets using an extension sleeve.
How do I mount in corners?
Surface end caps can take the place of a bracket going into a corner and still keep the heavy-duty strength.
Is this made of cheap plastic?
Absolutely not. Toden surfaces are a true 1-inch-thick, load-rated surface made from recycled plastic. They are impervious to humidity, highly resistant to chemicals and won't sag or rust.