12ft Dual-Tier Workstation| Floating Look | MOdular | Sag-free

Most garage storage systems lock you into a single setup forever. You buy a workbench with a built-in bottom shelf, and suddenly your shop vacuum or large storage totes don't fit underneath. You hang an overhead rack, and you're left without a quick-access staging spot for power tools while you work. Real projects evolve, and a rigid, static bench forces you to adapt to it rather than the other way around.

We built the Dual Tier Wall-Mounted Toden Workstation to double your working capacity without taking up a single square inch of floor space—and without locking you into one layout.

By utilizing two high-strength, floating Toden surfaces, this kit gives you complete architectural freedom. Whether you need overhead bulk storage or low-profile tool staging, it converts effortlessly between two high-performance configurations:

Configuration 1: The Overhead Powerhouse (Upper Tier + Main Bench)

• Overhead Storage: Position the second surface high above your main bench to store heavy HDX totes, power tool cases, and paper towels completely off the floor.
• Integrated Task Lighting: The bottom of the upper tier acts as a lighting canopy. Using the integrated LED groove, it casts clean, direct light down onto your main workspace and wall pegboard.
• Maximum Wall Space: Leaves ample open wall area between tiers for pegboards, magnetic strips, or mounted battery chargers.

Configuration 2: The Staging Engine (Main Bench + Lower Tier)

• Arm’s-Reach Staging: Position the second surface directly below your main workspace to create an instant staging deck for heavy circular saws, drill kits, and tool bags.
• Clutter-Free Surface: Keeps your primary workbench 100% clear for active projects while keeping your most-used tools within immediate reach.
• Elevated Floor Space: The lower tier mounts above ground level, leaving plenty of room below for rolling shop vacs, trash cans, or floor-bound storage bins.

Built for Heavy Loads, Zero Compromises

• Impermeable & Abrasion-Tolerant: Engineered with an ultra-durable, nonporous skin over a rigid hollow-core profile. It resists oil, chemical spills, and high humidity without swelling, peeling, or sagging.
• Streamlined Installation: Removes up to 70% of the mounting hassle compared to traditional bracket-heavy setups. You get superior structural support with fewer wall penetrations.
• Built-in Tech & Accessory Channels: Features integrated LED grooves, hidden wire-routing pathways, and under-surface mounting tracks that let you attach and slide modular accessories without drilling new holes.

Key benefits

• 1,200 lb surface rating for serious storage and real work in any application
• 1" thick, finished look that fits homes, garages, and small businesses
• Fewer brackets, less measuring vs typical “every 16 inches” systems
• Nonporous, abrasion-tolerant surface built for daily use, even in humid environments
• Integrated LED groove for clean under-shelf lighting on the fly learn more
• Built-in wire tray to route cords for desk / TV / workstation setups / pick up a too far away outlet
• Under-surface channels designed for modular mounting and long-run flexibility, you've never hung anything under a shelf-until now
• Multi-purpose by design: shelf → desk → bench → work surface → it's your world, we're just living in it
• Clean hardware + load-rated brackets (not flimsy, generic shelf arms) or diagonal bracing to get in the way

Best uses

• Garage wall shelf for bins, tools, and heavy gear
• Workshop workbench / workstation surface

* Check out our article for help on the best heights for your application here

How it works

1. Mount the brackets to wall studs (two brackets per kit, up to 48" apart).
2. Set the surface onto the brackets using the under-surface channel geometry.
3. Lock it in with the included twist pins
4. Finish the ends with the included end caps for the polished look
5. Optional: add LED strip lighting in the integrated groove and route cords in the wire tray. Learn more about LED lit shelving here

Sizing & System Fit

• Surface size: 16" deep × 72" long
• Surface thickness: 1" thick like a granite kitchen counter tops)
• Bracket size: 14" for a stepped back 2" to be hidden from view
• Designed to mount to standard wall framing, concrete, steel studs with minimal fasteners. Find the right fastener for your application in this article
• The underside is engineered with functional channels for modular positioning and a cleaner install geometry for brackets and accessories like storage hooks
• Works especially well anywhere you want a floating look with real load capability (garage, office, closet, mudroom, shop) and a heck of a lot easier to install

What’s included

• 2 × 6ft x 16" Surface
• 4 × 14" Wall Brackets
• 8 × Twist pins
• 2 × End caps (L+R)
• 1 × Assembly tool

Specifications

• Surface load rating: 1,200 lbs 
• Bracket load rating: 1,000 lbs each
• Length: 72 in (6 ft)
• Depth: 16 in
• Thickness: 1 in
• Installation: wall-mounted to studs or concrete; twist-pin locking connection for surface
• Integrated features: LED groove, wire tray, under-surface channels, built-in benefits to get your great project results.

Quick-hit FAQ's

Is this just a shelf?
No. It installs like a shelf, but it’s an all in on modular product—so it works as a workstation, desk, bench, TV console, or shelf depending on where you choose to mount it.

Can I run cords for a TV or computer setup?
Yes. The surface includes a dedicated wire routing area to keep cords cleaner and more intentional. You can also drill a hole into it easily with conventional drill bits if you want.

Does it support LED lighting?
Yes. There’s an integrated LED groove designed to accommodate LED strip lighting. You can easily to that later down the road by unlocking the twist pins. No need to stress because we did all the thinking for you and even have recommended products in this article.

How is this different from a wood shelf?
Wood gets expensive, requires a ton of tools, and messy (finishing bottlenecks), and it still won’t give you the integrated features (LED groove, wire routing, under-surface channel functionality) or this load class with a clean bracket system. Not to mention Toden surfaces are designed for extreme environments from bitter cold, to high heat, and relentless humidity.

How hard is installation?
It’s designed to be straightforward: mount brackets to studs, set the surface, lock with twist pins, cap the ends. We reduced the work to mount this surface to 4 screws every 6 feet, eliminating the pain by 70%. Toden brackets also mount to concrete and steel, check out this fastener selection guide.

What makes it “real-world” strong?
The rigidity comes from the engineered internal structure (not just thickness), paired with load-rated brackets and a locking connection. We started on this path because we couldn't find real world strong - so we invented one and took that process extremely seriously.