J.K.Verified
- Delivered in 3–5 business days
- Free shipping over $50
- Lifetime warranty
- Made in the USA and Canada
What's included
2 - 14" Wall Brackets
4 - Twist-lock Pins
2 - Closet Rod Brackets
1 - Surface End Caps (L+R)
1 - Twist-lock Assembly Tool
*Closet rod, not included.
Load ratings & dimensions
Width: 72"
Depth: 16"
Height: 1"
Bracket load rating: 1,000 lbs.
Depth: 14"
Width: 3"
Height: 7"
Closet Rod Bracket Load Rating: 300 lbs. each
Supports Rod Diameters: 1 1/4" thru 1 5/16" with snap fit
(1" rod diameter requires a drilled hole and screw)
Depth: 3"
Width: 1"
Height: 5"
Installation
Closet Rod Instructions:
1) Locate front channel of Toden Surface
2) Insert rod bracket spaced 12" off surface ends, snapping rod bracket into surface T-Slot
3) Recommended number of rod brackets per foot of closet rod:
Typical Application: 1 rod bracket every 4 feet of rod
Heavy Duty Applications: 1 rod bracket every 3 feet of rod
4) Insert all rod brackets per spacing recommendation in Step 3
4) Snap fit closet rod into rod bracket. Compatible closet rod sizes are:
- 1 1/4"
- 1 5/16"
Where it's made
Toden products are Patent Pending and internationally protected under the Patent Cooperation Treaty (PCT).
Recycled materials
Surface: 30% recycled content
Twist pin: 100% recycled content
Assembly tool: 100% recycled content
Shipping
Free shipping on orders over $50. Delivered in 3–5 business days.
FREE WALL HEIGHT GUIDE (PDF)
Industry standard heights for every space.
This closet that installs faster than anything else on the market, holds real weight, and delivers a clean, high-end showroom look when add LED Lights in the LED groove.
If you want a closet that installs faster than anything else on the market, holds real weight, and delivers a clean, high-end showroom look, the Toden Single-Tier Closet Shelf is your ultimate foundation.
Most single-shelf setups rely on the same flawed formula: diagonal wire braces every 16 inches, flimsy 12-inch particle board that bows under weight, and clunky end-cups that trap hangers at the wall. You spend hours drilling drywall anchors only to end up with a flexy rod and vertical blockades that ruin your closet flow.
The Toden Single Row Closet Shelf eliminates the core headaches of traditional closet builds. Featuring a premium, 16" deep heavy-duty surface—the exact depth found in high-end custom cabinetry—you get ample space for folded clothes, storage bins, or shoe boxes without items getting lost in the back.
Underneath the shelf, integrated twin channels accept our snap-fit closet rod brackets. You get complete freedom to place and adjust rod supports anywhere you want, anytime—with zero tools or fasteners. Add extra support under heavy winter coats or suits without ever interrupting your hanger’s continuous end-to-end glide.
Plus, every Toden surface features a dedicated, built-in LED lighting groove. Whether you want to add task lighting today or upgrade later down the road, you can achieve a seamless, professional look with light aimed right in front of your clothes—turning a basic closet into a high-end display without turning your weekend into a major construction project.
Key Benefits
- Hangers Slide End-to-End: No vertical blockades, end cups, or center braces interrupting your closet rod.
- Tool-Free Reconfigurability: Snap closet rod brackets in and out in seconds—reposition anywhere along the channel without drilling or measuring.
- Targeted Weight Support: Easily reinforce closet rod sections for heavy coats and suits without losing hanging length or trapping clothes.
- Real 16" Shelf Depth: True high-end storage capacity for wide bins, baskets, folded clothes, and luggage.
- Fewer Wall Mounts (Faster Install): Heavy-duty wall brackets mount into studs every 48" rather than every 16"—cutting installation time down by 70%.
- Built-In Showroom Lighting Option: Integrated under-shelf groove accepts hardwired strips or motion-activated LED lights, perfectly angling light toward your clothing.
- No Wall Anchors or Rod End Cups: Support originates directly from the snap-fit brackets mounted underneath the shelf profile.
Best Uses
- Single-Hang Closets: Ideal for long garments like coats, dresses, suits, and trench coats.
- Entryway & Mudroom Coat Closets: Heavy-duty storage up top with seamless coat hanging below.
- Guest Room & Reach-In Closets: Quick, premium upgrade for tight spaces that need clean functionality.
- Laundry Room Hanging & Staging: Keep freshly ironed clothes organized with a deep overhead laundry basket shelf.
- Modular Master Closet Extensions: Pair multiple single kits end-to-end to build long, continuous custom runs.
How it Works
- Mount the wall brackets into studs at your chosen heights (bracket spacing up to 48").
- Snap the Toden surfaces onto the brackets to create two sturdy shelves.
- Snap the closet rod brackets into the under-shelf channel—anywhere along the row of shelving. Can be adjusted any time, without need for tools or fasteners.
- Position rod brackets tight to the wall, or Up to ~10" off the wall to support a rod without needing wall rod flange/end cups.
- Insert your closet rod (not included)
- Add lighting (optional) using the integrated LED groove and wire channel, learn more about LED lighting for closets here
- Change it later by snapping rod brackets out and relocating them—no tools required.
Sizing & System Fit
What this kit builds
- A 6 ft Single-Tier closet: (1) 16" deep shelf levels and closet rod brackets for two hanging rows (closet rod not included).
- Can be joined to make (1) 16" deep x 144" (12 ft) long closet with extension sleeve
- Shop for the Extension sleeve here
Wall Bracket Spacing
- Wall brackets mount up to 48" apart (fewer brackets, less measuring, faster install)
- 24" overhangs make handling corners a cinch (no cleats required) and using available studs which are easy to find
Standard closet height guidelines (8 ft ceilings)
- Single hanging row: ~69"
-
Double hanging row: Bottom ~43.5", Top ~84.75"
(Allows for garment length, footwear clearance, and 8ft ceiling height.) - Learn more about shelving heights in this article
System compatibility
- Designed for Toden surfaces and accessories
- Closet rod bracket positions anywhere along the channel and can be moved anytime.
- Mounts to wood, steel, brick, and concrete
- Hardwire LED strips or use rechargeable light for a simple upgrade. Learn more
Specs
What’s included
- 2 x 6ft x 16" surfaces
- 4 x 14" wall brackets
- 4 x closet rod brackets
- 4 x end caps
- 1 x assembly tool
- Closet rod not included
Load ratings
- Surface: 1,200 lbs (each)
- Wall bracket: 1,000 lbs (each)
- Closet rod bracket: 300 lbs (each)
Notes for rock solid installs
- Install wall brackets into studs and follow Toden installation instructions.
- Closet rod strength depends on the rod material/diameter and span length.
- Install a Toden closet rod bracket anywhere to reinforce the closet rod you use
- Closet rod brackets do not interrupt hangers from sliding
Quick-hit FAQ's
Is the closet rod included?
No. This kit includes the rod brackets, but not the rod itself—so you can choose the rod style you want and add additional closet rod brackets if needed.
Do I have to use closet rod cups for the ends or drill into drywall?
No. The rod is supported by snap-fit rod brackets in the under-shelf channel, not by end-mounted cups.
Can I slide hangers across the full rod?
Yes. Because Toden closet rod brackets can be added anywhere in the channel for added support we ensured no vertical blockades would interfere with hangers - slide hangers freely from end-to-end.
Can I add extra rod support for heavy sections?
Yes. Add additional closet rod brackets where you need more reinforcement (sold separately) without cluttering the entire run.
Can I add lighting?
Yes. The surface includes a dedicated LED groove. You can do this anytime, as the snap-lock pins are easily removed without tools for easy modification. Use a hardwired LED strip or a rechargeable motion-sensor light. See recommended products here.
Is this only for small closets?
No. For a master closet, use multiple kits or add surfaces to build longer runs—the benefits scale. Checkout extension sleeves to make longer closet runs.
How adjustable is it really?
The shelf heights are fixed once mounted, but the rod brackets are tool-free adjustable anywhere along the under-shelf channel. The surface is also adjustable as it can overhang a bracket side-to-side for finding the perfect shelf position or creating offsets. Learn more about mounting heights here
Reviews
4.8 89 reviews
Install Like a Pro
Get a pro-grade result
Questions
Common questions
Still unsure? Call (800) 679-1256 or use the chat.
What are the load ratings?
Surface: 1,200 lb. Wall bracket: 1,000 lb. Closet rod bracket, storage hook and surface end cap: 300 lb each.
How do I work out what I need?
Start with a 72-inch kit, then add 72-inch extension kits until you reach your wall length. Kits include the wall brackets, pins and surfaces for the run, plus extension sleeves where sections join.
How far apart do the brackets go?
Every 48 inches, so there are fewer studs to find. For extra-heavy loads, add more brackets wherever you need them.
How much can I overhang?
Up to 24 inches past a bracket. That means fewer brackets, less cutting, and you can split surface seams between brackets using an extension sleeve.
How do I mount in corners?
Surface end caps can take the place of a bracket going into a corner and still keep the heavy-duty strength.
Is this made of cheap plastic?
Absolutely not. Toden surfaces are a true 1-inch-thick, load-rated surface made from recycled plastic. They are impervious to humidity, highly resistant to chemicals and won't sag or rust.